60mm Lens Cap / Cover for Telescopes, Spotting Scopes, Binoculars, or Monocular: 60x11mm. Rubber. Fit 59-61mm Lens

Add to Cart:

  • Model: 60mm lens cap (11mm deep)
  • Shipping Weight: 0.025Kgs
  • 10 Units in Stock

This lens cap is for optical instrument (eg. binoculars, telescopes and spotting scopes).

Internal Diameter: 60mm (Note: the size is measured as internal diameter of the cap, which is equivalent to the external diameter of the lens including the lens housing).

Depth: 11mm

Material: Rubber.


This listing is for ONE lens cap as described above (not for a pair).

There are ribs / ridges around the inner rim of the cap. These enable the cap to fit lens with external hood diameter from around 59mm to 61mm. If the cap is a little too big for the hood, you can consider lining the inner rim of the cap with some tape or foam to make it stay on better.

Note: The size of the lens cap is measured as Internal Diameter of the cap, which is equivalent to the external diameter of the lens including lens housing (as shown in the picture above). Please allow a small difference in measurement (eg. 0.5-1mm). A rubber cap can normally fit a slightly bigger lens than the specified size (eg. +1mm to 2mm depending on actual size).

If a cap is slightly bigger than the external diameter of the lens housing and there is no matched cap size available for the lens, you may consider putting an adhesive cloth tape around the internal edge/rim of the cap. This can often secure the cap on the lens.

Payment methods accepted: PayPal, Visa, MasterCard, Solo, Maestro, AmericanExpress, Discover
- Sitemap -
Copyright © 2020 NIPON SCOPE & OPTICS.All rights reserved.
Nipon Scope & Optics is a trading name of Nipon Optics (UK) Ltd, a company registered in England & Wales, No. 07291656. VAT No. 155145030